SA-3 cylinder shape burrs are great for interior contour work and deburring. Due to the extreme hardness on this tungsten carbide, you can use it on a lot more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are generally applied to ferrous and non-ferrous metals, soft steel, and also for all non-metal materials for example stone, plastics, real wood, and ceramic. Double cut burrs will leave a rather smoother finish than single cut due to producing smaller chips since they cut away the pad. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is among the most popular cut and may look at you through most applications.
Machines Suited for:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Certain, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Other Materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are great for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is determined from the material you use your burr on. If you might be experiencing chipping, you are most likely operating at excessive of speed to the application. Start with a slower speed and increase in the process until you attain the best results
Apply light pressure and allow tool perform the work. Bearing documented on the tool can result in reduced tool life plus a dull burr.
Always wear proper PPE to add (and not limited to) safety glasses, hearing protection, respirator, and hand protection. Keep all guards in place on the machine.
Avoid experience electrical power drills; the slower speeds can result in chipping of one’s workpiece.
To read more about SA-3 Carbide Burrs go this popular webpage