Use tungsten carbide burrs on hard materials including steel, aluminum and iron, various stone, ceramic, porcelain, wood floor, acrylics, fibreglass and reinforced plastics. When utilized on soft metals such as gold, platinum and silver, carbide burrs are fantastic while they lasts for a long time with no breaking or chipping.
Different cuts of carbide burrs will probably be best suited for sure materials.
Ways to use SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools such as die grinders, pneumatic rotary tools and speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools such as a Dremel.
Carbide burrs are widely used for metalworking, tool making, engineering, model engineering, wood carving, jewelry creation, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are used in the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you choose?
Single cut (one flute) carbide burrs have a right handed (up cut) spiral flute. Single cut can be used with stainless-steel, hardened steel, copper, surefire and ferrous metals and definately will remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removal of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel as well as for all non-metal materials like stone, plastics, wood and ceramic. This cut has more cutting edges and may remove material faster. Double cut also known as Diamond Cut or Cross Cut (2 flutes cut across each other) and definately will leave a smoother finish than single cut due to producing smaller chips while they cut away the material. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are hottest and benefit most applications.
Medium- light removal of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed should you use?
The speed from which you utilize your carbide burr in your rotary tool is dependent upon the information you’re deploying it on and also the contour being produced but it’s safe to assume you do not need more than 35,000 RPM. If your burs are chipping easily this could be because of the speed being not quick enough. It’s ideal to begin the bur off slow, increasing the speed as you go along. High speeds may prevent clogging in the flutes of your carbide burs.
As with all drill bits and burrs, permit the burr carry out the work and apply only a little pressure, otherwise the cutting edges with the flutes will chip away or become smooth prematurely, lowering the life of your burr.
For more details about SB-3 Carbide Burrs check out this useful web page