Carbide Burrs (also known as Rotary Burrs) bring cutting, shaping, grinding and for the eliminating sharp edges, burrs and excess material (deburring).
1. What material can Carbide Burrs be utilized on?
Carbide burrs can be used on many materials. Metals including steel, aluminum and iron, various wood, acrylics, fibreglass and plastics. When suited for soft metals including gold, platinum and silver, carbide burrs are excellent as they can last a very long time without chipping or breaking.
Steel, Carbon Steel & Stainless-steel
Surefire
Aluminium
Titanium
Cobalt
Nickel
Gold, Platinum & Silver
Ceramics
Fibreglass
Plastic, Carbon Fiber Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)
Brass, Copper & Bronze
Zinc
Wood
Different cuts of carbide burrs is going to be best suited to particular materials, understand the next point below to find out about the various cuts.
Exactly what do You employ Carbide Burrs In?
Ideally carbide burrs are used in Air Tools i.e Die Grinders, Pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools such as a Dremel.
Always employ a handpiece that runs true i.e with no wobble.
Who Uses Carbide Burrs?
Carbide burrs are traditionally used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. And so are employed in the aerospace, automotive, dental, metal sculpting, and metal smith industries to just some.
2. Carbide Burrs Commonly Appear in Two Cuts; Single Cut and Double Cut (Diamond Cut)
Single cut (one flute) carbide burrs possess a right handed (Up cut) spiral flute. These usually are used in combination with stainless steel, hardened steel, copper, certain, and ferrous metals and will remove material quickly with a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy eliminating material
Milling
Deburring
Cleaning
Creates long chips
Double cut carbide burrs tend to be utilized on ferrous and non ferrous metals, aluminium, soft steel as well as all non-metal materials for example plastics and wood. They’ve got more cutting edges and can remove material faster. Double cut are sometimes referrred to as Diamond Cut or Cross Cut (2 flutes cut across one another) will leave a smoother finish than single cut because of producing smaller chips as they cut away the information. Use for medium-light stock removal, deburring, finishing and cleaning. A dual cut carbide burr is easily the most popular cut and will look at you through most applications.
Medium- light elimination of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
3. What Speed or RPM should you use your Carbide Burrs?
The speed where you utilize your carbide bur in your rotary tool is dependent upon the information you’ve it on along with the contour being produced but it is pretty sure you don’t to exceed speeds of 35,000 RPM.
4. Don’t Apply An excessive amount of Pressure
Like all drill bits and burrs, permit the burr do the work and apply only a little pressure otherwise the cutting edges with the flutes will chip away or become smooth too rapidly, minimizing the life span of your burr.
5. Carbide Burrs are Harder Than HSS Burrs
Our Carbide Burrs are machine ground from a specially chosen grade of carbide. Due to the extreme hardness of the Tungsten Carbide they can be utilized on far more demanding jobs than HSS (High-speed Steel).
Carbide Burrs also perform better at higher temperatures than HSS to help you run them hotter, and for longer.
HSS burrs are going to soften at higher temperatures so carbide is obviously a better choice for too long term performance.
Which are the Features of Tungsten Carbide Burrs?
Long life
Use for too long production runs
High stock removal
Ideal for using on many hard and tough materials
Well suited for Deburring, finishing, carving, shaping and smoothing welds, moulds, dies and forgings
6. Maintain your Carbide Burr On the go
When using your carbide burr never ensure that is stays still for days since this will prevent the burr from digging and jabbing to your material causing unsightly marks and roughness.
End while on an ‘up’ stroke to get a smoother finish to your work.
Stay Safe:
Always make sure your burr shank is well inserted in your collet and clamped down tightly
Keep pressure light and the bur moving, concentrating on the greatest material first
Keep your work is secured tightly to your workbench
Don’t snag or jam your burr into the work
Wear eye protection as a minimum, but even better utilize a full shield for your face
To get more information about SF-1 Carbide Burrs check this useful webpage