SA-3 cylinder shape burrs are good for interior contour work and deburring. Due to extreme hardness of this tungsten carbide, it can be used on much more demanding jobs than HSS (High-Speed Steel).
Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials for example stone, plastics, wood floor, and ceramic. Double cut burrs leaves a rather smoother finish than single cut due to producing smaller chips as they cut away the fabric. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is the most popular cut and may view you through most applications.
Machines Utilized on:
Die Grinders and hand-held pneumatic grinders
Application:
Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are perfect for interior contour work like peripheral and face milling.
Safety Tips & Techniques:
Tool speed is determined through the material you use your burr on. If you might be experiencing chipping, you are most probably operating at too high of speed to the application. Start using a slower speed and increase in the process unless you get the greatest results
Apply light pressure and allow the tool do the work. Bearing documented on the tool can result in reduced tool life plus a dull burr.
Always wear proper PPE to incorporate (although not tied to) safety glasses, hearing protection, respirator, and work gloves. Keep all guards in place on your machine.
Avoid experience electricity drills; the slower speeds can lead to chipping of your respective workpiece.
For more info about SA-3 Carbide Burrs have a look at this useful internet page