Use tungsten carbide burrs on hard materials including steel, aluminum and certain, all sorts of stone, ceramic, porcelain, wood, acrylics, fibreglass and reinforced plastics. When applied to soft metals like gold, platinum and silver, carbide burrs are perfect as they lasts for years without any breaking or chipping.
Different cuts of carbide burrs will be ideal for sure materials.
Uses of SB-3 Carbide Burr Die Grinder Bit
Use carbide burrs in air tools including die grinders, pneumatic rotary tools and high speed engravers. Micro Motors, Pendant Drills, Flexible Shafts, and hobby rotary tools like a Dremel.
Carbide burrs are traditionally used for metalworking, tool making, engineering, model engineering, wood carving, making jewelry, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting. Carbide burrs are employed from the aerospace, automotive, dentistry, stone and metalsmith industries.
What SB-3 Carbide Burr cut if you choose?
Single cut (one flute) carbide burrs have a right handed (up cut) spiral flute. Single cut is utilized with stainless-steel, hardened steel, copper, surefire and ferrous metals and may remove material quickly using a smooth finish. Use for heavy stock removal, milling, deburring and cleaning.
Heavy removal of material
Milling
Deburring
Cleaning
Creates long chips
Use double cut carbide burrs on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials such as stone, plastics, hard wood and ceramic. This cut has more cutting edges and may remove material faster. Double cut also called Diamond Cut or Cross Cut (2 flutes cut across the other) and can leave a smoother finish than single cut on account of producing smaller chips while they cut away the information. Use double cut for medium-light stock removal, deburring, finishing and cleaning. Double cut carbide burrs are most popular and work for most applications.
Medium- light removal of material
Deburring
Fine finishing
Cleaning
Smooth finish
Creates small chips
What SB-3 Carbide Burr RPM speed the use of?
The speed of which you have your carbide burr inside your rotary tool is dependent upon the information you’re utilizing it on along with the contour being produced but it’s safe to assume you don’t greater than 35,000 RPM. When the burs are chipping easily this may be as a result of speed being too slow. It’s ideal to begin the bur off slow, improving the speed on the way. High speeds may prevent clogging from the flutes of the carbide burs.
As with most drill bits and burrs, permit the burr perform work and apply only a little pressure, otherwise the cutting edges in the flutes will chip away or become smooth too quickly, minimizing the life of your burr.
To get more information about SB-3 Carbide Burrs go to our website